DSpico

Notice: The firmware for this device is not installed before you receive it, you will need to find a copy of the firmware to install. We can not offer direct links to archive orgs or setup guides that host these files, not even in support emails or support chats. Installing the firmware is easy and just requires a computer and a USB cable, no special software required.
Grey units will ship starting Wednesday April 1st 2026
Clear units will ship in early May

The DSpico is the open-source project from the LNH Team. Designed for both DS and DSi consoles, it features fully open hardware and firmware built on the RP2040 micro-controller. 

More info at the project page https://www.lnh-team.org/dspico_hw.html

Our DSPico will come with the following:

Injection Molded Shell
Holofoil label. 
DSPico Board assembled (Firmware requires files we can not legally share)

You will need to download our compiled zip with the directory structure in place for the DSPico here: (Link) 

This device is does not come with copyrighted software, and we will not provide any instructions on where to get items like that.  Support is limited to device functionality.

Firmware can either be generated by following the guide from the LNH team, or searching for pre-compiled binary files called UF2 files. Install is achieved by plugging the cart into a PC/Mac with a Micro-USB cable, it will appear as a USB storage device and you can just copy the UF2 file to that. The device will disconnect and reconnect signifying the firmware was installed. 
Copy the SD card files to you SD formatted Fat32 and you are good to go.